Product ID:MAKROLON POLYCARBONATE RESIN
MSDS Date:01/04/1988
FSC:9330
NIIN:01-229-1910
MSDS Number: BGWWF

MOBAY CORP

MOBAY ROAD
PITTSBURGH, PA 15205

Emergency Phone: 412-923-1800

Info Phone: 800-424-9300(CHEMTREC)

Cage: EO419

MOBAY CORP

PITTSBURGH, PA 15205 US

Telephone: 800-662-2927

Cage: EO419

CARBONIC ACID,POLYMER WITH

CAS: 25037-45-0

OSHA PEL 5 MG/CUM(RESPI.DUST

ACGIH TLV: 10MG/CUM(TOTSAL DUST

CARBONIC DICHLORIDE,POLYMER WITH

CAS: 25971-63-5

OSHA PEL 5 MG/CUM(RESPI DUST)

ACGIH TLV: 10MG/CUM(TOTAL DUST)

CARBONIC DICHLORIDE,POLYMER WITH

CAS: 32844-27-2

OSHA PEL 5 MG/CUM(RESPI DUST)

ACGIH TLV: 10MG/CUM(TOTAL DUST)

INGREDIENT #1 & 2 ARE HOMOPOLYMER,AS PRODUCT'S "BASE

RTECS: 9999999ZZ

THE EMPIRICSAL CHEMICAL FORMULA FOR #3 INGREDIENT IS

RTECS: 9999999ZZ

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:THIS PRODUCT IS NOT CONSIDERED A
HAZARDROUS MATERIAL DURING NORMAL STORAGE & USE.CERTAIN INDIVIDUALS
MAY EXPERIENCE IRRITATION OF THE EYES WITH SYMPTOMS OF
SWELLING,TEARING & ITCHING,IRRITATION OFMTHE SKIN WITH SYMPTOMS OF
REDENNING,SWELLING & RASH,IRRITATION OF THE RESPIRATORY
TRACT,COUGHING,CHOKING.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:SENSITIVE INDIVIDUALS & INDIVIDUALS
WITH RESPIRATORY IMPAIRMENTS.MAY BE AFFECTED BY EXPOSURE TO
SPECIFIC COMPONENT IN THE PROCESSING FUMES.

First Aid:EYE:FLUSH EYES WITH PLENTY OF LUKEWARM WATER; SKIN:WASH
AFFECTED AREAS WITH SOAP & WATER; INHALE:REMOVE TO FRESH AIR. SEE A
PHYSICIAN IF ANY IRRITATION PERSISTS.

Autoignition Temp:Autoignition Temp Text:1070F
Extinguishing Media:WATER,WATER FOG,DRY CHEMICAL,FOAM,CO*2-(WATER IS
REST,CO*2 IS GENERALLY NOT RECOMMENDED,LACK OF COOLING CAPACITY).
Fire Fighting Procedures:FULL EMERGENCY EQUIPMENT WITH SELF-CONTAINING
BREATHING APPARATUS SHOULD BE WORN BY FIREFIGHTERS.
Unusual Fire/Explosion Hazard:DURING A FIRE IRRITATING & TOXIC GASES &
AEROSOL MAY BE GENERATED BY THERMAL DECOMPOSITION & COMBUSTION.

Spill Release Procedures:REMOVE MECHANICALLY BY SWEEPING,SHOVELING OR
VACUUMING THE RESIN & PLACE INTO CONTAINER FOR REUSE OR DISPOSAL.
WATCH SLIPPING HAZARD ON THE AREAS OF SPILL.

Handling and Storage Precautions:MATERIALS SHOUULD BE STORED INDOORS TO
PROTECT IT FROM RAIN OR EXCESSIVE MOISTURG.MATERIAL CAN BECOME
SOFTENED AT TEMPERATURES ABOVE 200F.
Other Precautions:STORE IN CLEAN,DRY ENVIRONMENT IN SEALED CONTAINERS,
IF THE RESIN IS A FOOD-GRADE RESIN IT SHOULD NOT BE STORED WITH OR
NEAR ANY OTHER TOXIC MATERIALS THAT MAY ADULTERATE THE RESIN.

Respiratory Protection:NONE NORMALLY. IN CASE TLV IS EXCEEDED.WEAR A
NIOSH/MSHA-APPROVED DUST RESPIRATOR.
Ventilation:NORMAL VENTILATION.
Protective Gloves:NONE USUALLY.
Eye Protection:SAFETY GLASSES.
Supplemental Safety and Health

HCC:N1
Decomp Temp:Decomp Text:788F
Vapor Pres:0
Spec Gravity:1.1-1.4
pH:7
Solubility in Water:INSOLUBE
Appearance and Odor:SOLID, CYLINDRICAL PELLETS,VERY LITTLE OR NO ODOR.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
NONE STATED
Stability Condition to Avoid:SOURCES OF STATICS BUILD-UP & ALL OTHER
IGNITION SOURCES SHOULD BE REMOVED.
Hazardous Decomposition Products:CO,CO*2,BISPHENOL A,METHANE,DIPHENYL
CARBONATE & PHENOL CERIVATIVES. POSSIBLE TRACE AMOUNTS OF BROMINE
COMPOUNDS.

Waste Disposal Methods:MATERIAL MAY BE INCINERATED OR LANDFILLED IN
COMPLIANCE WITH FEDERAL,STATE & LOCAL ENVIRONMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.